SealGreen Concrete Patch Repair is a cementitious stainable material design for grouting small hairline cracks, divots created from the removal of wood carpet strips, and small holes in interior concrete floors.
SealGreen Concrete Patch can be stain, painted or seal. SealGreen Concrete Patch is design for hairline crack repair from 1/32-inches to ¼-inch wide cracks. Do not use this product for resurfacing. Must be installed at temperatures over 50ºF.
Mix small quantities by hand using 3 parts by volume of powder to 1 part of water. Use a margin trowel and mix vigorously for 2-3 minutes. Mix thoroughly to obtain a lump-free consistency. The pot life of SealGreen Concrete Patch is approximately 20 minutes at 70ºF. If the product begins to set in the bucket, remix before using. Do not add more water. Additional water will weaken the dressing and lower its strength. In warm weather, use cold water to extend the working time.
Mixing buckets, margin trowel, steel trowel, sponges. For small cracks, it is recommended to apply with sponge using tile grouting practices,
Requires no special curing procedures, avoid applying this product if rain is expected within 6-8 hours or freezing temperatures could occur within 24 hours of application. As with any cementitious material, the above conditions can alter the appearance and performance of the dressing.
Mix Ratio: 3 parts powder to 1 part by volume of water at 70ºF
Walkable: Light Foot traffic in 2 hours. Vehicular traffic in 6-8 hours
Storage: Store in a cool dry area. Do not expose to sun.
Shelf Life: One year
All prices are in USD.