We provide services to all metro areas in Kansas and Missouri including:
Overland Park, KS
Lenexa, KS
Gardner, KS
Lawrence, KS
DeSoto, KS
Shawnee, KS
Olathe, KS
Leawood, KS
Prairie Village, KS
Mission Hills, KS
Kansas City, MO
Parkville, MO
Smithville, MO
Excelsior Springs, MO
Gladstone, MO
Independence, MO
Lee's Summit, MO
Liberty, MO
Raymore, MO
Blue Springs, MO
Raymore, MO
Raytown, MO
St. Louis, MO
St. Charles, MO
|
|
W10 High Gloss Concrete Finish Coat
 Basement Floor with 1 coat of W10 Finish Coat Office Floor with 1 application of W10 Finish Coat Floor with 2 applications of W10 Finish Coat Floor with W10 Finish Coat Office Floor after 2 years maintained with W10 Finish Coat |
|
Price: From $21.95 to $389.95
Manufacturer: SGW10
Manufacturer Part No: SGE10
Product Options
| |
|
SealGreen W10 - High Gloss Finish Coat
The SealGreen W10 Finish Coat is an acrylic wax emulsion, design to give high gloss look to finished surfaces with SealGreen E10 High Performance Epoxy Sealer. Also used for restoring shine or gloss to inside concrete overlays, stain floors, and other decorative concrete floors.
The SealGreen W10 Finish Coat is applies after the SealGreen E10 High Performance Sealer has cured for 24 hours.
Multiple applications of SealGreen W10 will increase the gloss level of the surface.
SealGreen W10 is also use as a maintenance coat to restore the gloss of the surface as needed.
SealGreen W-10 is an environmentally friendly, low odor finish coat.
SealGreen W-10 is acceptable for use in schools, health care, commercial and industrial buildings. SealGreen W-10’s quick dry time is ideal for retail stores where quick access for walking traffic is required.
Approximate Square Feet Coverage for floor coated with SealGreen E10 High Performance Epoxy Sealer:
| Quantity
|
Stained Concrete
|
| 1 Gallon (1st Coat)
|
1,500 - 1,900 Sqft.
|
| 1 Gallon (2nd Coat)
|
2,000 Plus Sqft.
|
| 1 Quart (1st Coat)
|
350 - 500 Sqft.
|
| 1 Quart (2nd Coat)
|
500 Plus Sqft.
|
Physical Properties of the SealGreen W10 Finish Coat:
Solids: 25%
Flash Point: None
Dry Time: 1.5 hours
Spread Rate: 1,400 to 1,900 square feet per gallon.
Finish: High Gloss
Applicator:
Option 1: Spray apply product using a clean hand held unit.
Option 2: Apply with a microfiber mop or pad.
Option 3: Apply with ½-inch nap roller.
Optional when dry, buff with a microfiber-buffing pad. |
Price: From $12.95 to $28.95
Enhancing Acrylic Concrete Sealer for color restoration and protection of decorative concrete, stamped concrete, stain concrete and plain concrete, surface film forming
|
Price: From $10.95 to $845.00
SealGreen E-10 is an environmentally friendly, low odor, water based, one part epoxy, designed to enhance stain color, provide moisture barrier. and design for daily traffic. UV protected simple to use and fast drying
| |
Product Reviews
| (1 Rating, 0 Reviews) |
Average Rating:
|
|
|
|